End Entry Construction Ball Valve Design Standards

Design Floating end entry
Seats Soft seated, self-relieving
Design Std ASMEB16.34, EN12516, API608, API6D, BS5351, DIN3357, JIS2071, MSS SP72
Construction One piece body, Anti static device & blow-out proof stem
End connections Flanged, BW, SW, THR, HUB
Face to Face ASME B16.10, EN558, JIS B2002, MSS SP72
Operated Lever, Gear, Actuator (pneumatic - electric - hydraulic)
Design & Testing All available international standards according to API6D, API598, EN12266, MSS SP82, ISO5208
Fire safe Design and Certified API607 / API6Fa / ISO10497
Fugitive emission ISO EN15848-1, EN15848-2
Mounting pad ISO5211-Top flange
Options - Extended bonnet
- Lipseals
- Local CRA overlay
- Heating jacket
- Drain & vent
- AED seals
- Mechanically linked
- V-port

  • Size and bore:
    - ANSI 1/4” - 6”
    - DN 6 - DN 150
  • Pressure range:
    - ANSI 150 lbs - 1500 lbs
    - DIN PN 10 - PN 260
  • Temperature:
    - minus 196 °C up to 260 °C
    - minus 320 °F up to 500 °F

Ball seat designs, hard facing and soft seats

Ball seat design

The shaped sealing surface feature of the valve makes the sealing more reliable. Designs with various types of low friction seat materials are available.

Hard facing and soft seat options

Thermoplastic seat materials TFM, PTFE, RPTFE, PEEK, POM, PCTFE
For Cryogenic service valve equipped with cavity relief hole in ball, special cryo seating construction that withstand fluctuations of pressure and temperature.

Applications for End Entry Construction Ball Valves

Red Point’s end entry seated floating ball valves can be deployed for a wide variety of applications in the oil & gas, (petro) chemical, mining and power industries when high quality and highly reliable valves are required. A few example applications include:

• High-cycle and switching services)
• Oxygen, nitrogen or hydrogen
• Polyethylene or polypropylene
• Oil & Gas sevices
• Hydrogen
• Food/Pharma
• Toxic/Lethal Service
• Autoclave services
• Coal conversion and gasification
• Separator, filter and drying systems
• Compressor stations
• Cryogenic services

Body Material

Commonly used body materials

 

 

 

– Nickel Alloys (Monel®, Inconel®, Hastelloy®, Incoloy®)
– Duplex and Super Duplex
– Carbon steel and low temp carbon steel
– Low alloy steel
– Stainles steel
– Titanium
– Zirconium

View all materials

Get a quote today

To receive a production quote, please submit your RFQ and we will reply within 24 hours to you. Alternatively, send us your request by email: request @ redpoint.nl

  • This field is for validation purposes and should be left unchanged.

We design, engineer and produce your tailor-made valves