Swing Check Valve Design Standards

Design Bolted-Welded Cover/Wafer/Lug/Tilting disc
End connections Flanged, BW, SW, THR, HUB
Options Pressure seal cover, soft and metal seat, drain tapping point, By-pass
Design features Springless design
Design & testing All available international standards according to API - EN - ISO
Installation position Horizontal and/or vertical

Size and pressure ranges

  • Size and bore:
    - ANSI 1” - 16”
    - DN 25 - DN 400
  • Pressure range:
    - ANSI 125 lbs - 4500 lbs
    - DIN PN 10 - PN 400
  • Temperature range:
    - minus 196 ºC up to 816 ºC
    - minus 320 °F up to 1,500 °F

Swing Check Valve Features and Benefits

– Disc/Obturator and seats are grinded and lapped to a mirror finish and tightly guided to prevent dragging and seat damage.
– Body and cover joint accurately machined with high surface finish sealing chamber.
– Low emission valve technology with a design optimized for extended service life.
– Seal ring construction for excellent sealing.
– Full open, disc out of flow
– Pressure Seal Cover design available
– Low pressure cracking
– High flow capacity, minimize flow velocity

Applications for Swing Check Valves

Red Point’s swing check valves can be deployed for a wide variety of applications in the oil & gas and (petro)chemical industries when high quality and highly reliable valves are required. A few example applications include:

• High-temperature services
• High-pressure oxygen, nitrogen or hydrogen
• Solids handling (powders, fines, dust and catalysts)
• Polyethylene or polypropylene
• Coal conversion and gasification
• Thermal fluids
• Separator, filter and drying systems
• Compressor stations
• On/off isolation service
• Oil and gas manifolds

Body Material

Commonly used body materials




– Nickel Alloys (Monel®, Inconel®, Hastelloy®, Incoloy®)
– Duplex and Super Duplex
– Carbon steel and low temp carbon steel
– Low alloy steel
– Stainless steel
– Titanium
– Zirconium

View all materials

Get a quote today

To receive a production quote, please submit your RFQ and we will reply within 24 hours to you. Alternatively, send us your request by email: request @ redpoint.nl

  • This field is for validation purposes and should be left unchanged.

We design, engineer and produce your tailor-made valves